Co-simulation with Abaqus and Dymola
Abaqus-Dymola co-simulation is useful when logical modeling needs to be included in a physical system simulation; for example, it can be used to couple Anti-lock Braking System (ABS) logic modeled in Dymola with an Abaqus rolling tire and brake simulation. In a typical workflow, sensor data computed in Abaqus (the physical system) are passed to Dymola (the controller), which in turn computes the needed actuation to drive the Abaqus model to a desired state. The powerful logical modeling features in Dymola cover a wide variety of engineering fields, such as electromechanics, control systems, hydraulics, penumatics, etc. This course illustrates coupling Dymola and Abaqus to develop a very versatile logical-physical modeling capability.
- Level
- Advanced
- Length
- 5 hours 35 minutes
- Product
- Abaqus
- Delivery
- Instructor-led or eLearning
What you will learn
- Set up an Abaqus model for Abaqus-Dymola cosimulation
- Create a simple control system in Dymola
- Run a co-simulation
Topics covered
- Overview - Co-simulation with Abaqus and Dymola10 min
- 1 - Abaqus-Dymola co-simulation50 min
- 2 - Introduction to Dymola1 hour 15 min
- 3 - Co-simulation features in Abaqus and execution2 hour 15 min
- 4 - Interpretation of results1 hour
Who it is for
Simulation Analysts
Prerequisites
Introduction to Abaqus or equivalent. Experience using Abaqus and a basic understanding of control systems. Some familiarity with Dymola usage is helpful but not required.
