SIMULIASimulation
Heat Transfer and Thermal- Stress Analysis with Abaqus
The success of many structural designs requires a thorough understanding of both the thermal and mechanical response of the design. Temperature-dependent material properties, thermally-induced deformation, and temperature variations all may be important design considerations. This course introduces you to the heat transfer and thermal-stress capabilities available within Abaqus. Practical examples and workshops are used to illustrate these capabilities.
- Level
- Advanced
- Length
- 13 hours 5 minutes
- Product
- Abaqus
- Delivery
- Instructor-led or eLearning
What you will learn
- Perform steady-state and transient heat transfer simulations
- Solve cavity radiation problems
- Model latent heat effects
- Perform adiabatic, sequential, and fully coupled thermal-stress analyses
- Model contact in heat transfer problems
Topics covered
- Overview - Heat Transfer and Thermal-Stress Analysis with Abaqus10 min
- 1 - Heat Transfer and Stress Analysis Overview15 min
- 2 - Heat Transfer Basics1 hour 10 min
- 3 - Geometry, Material Properties, and Elements1 hour 30 min
- 4 - Analysis Procedures and Convergence1 hour 30 min
- 5 - Boundary Conditions and Loads1 hour 30 min
- 6 - Thermal Interfaces1 hour
- 7 - Thermal Output and Postprocessing1 hour 5 min
- 8 - Thermal-Stress Analysis20 min
- 9 - Sequentially-Coupled Thermal-Stress Analysis2 hour
- 10 - Fully-Coupled Thermal-Stress Analysis2 hour
- 11 - Adiabatic Analysis30 min
- A1 - Heat Transfer Theory-
- A2 - Forced Convection-
- A3 - Cavity Radiation-
- A4 - Thermal Fatigue-
Who it is for
Simulation Analysts
Prerequisites
Introduction to Abaqus or equivalent and experience using Abaqus.
Related courses
SIMULIAAbaqusFundamental
Introduction to Abaqus
27 hours 15 minutesView course
SIMULIAAbaqusAdvanced
Electromagnetic Analysis with Abaqus
9 hours 15 minutesView course
SIMULIA3DEXPERIENCE PlatformAdvanced
Structural Simulation: Heat Transfer and Thermal Stress Analysis
13 hours 15 minutesView course
SIMULIAAbaqusAdvanced
Modeling Stents Using Abaqus
11 hoursView course
SIMULIAAbaqusAdvanced
Electrochemical Simulation with Abaqus for Li-ion Batteries
16 hours 45 minutesView course
SIMULIAAbaqusFundamental
Introduction to Abaqus/CAE
15 hours 45 minutesView course
SIMULIAAbaqusFundamental
Fitness-for-Service Analysis with Abaqus
14 hours 45 minutesView course
SIMULIAAbaqusAdvanced
Crashworthiness Analysis with Abaqus
19 hours 15 minutesView course